Warning: Creating default object from empty value in /home/customer/www/ccmfinotello.com/public_html/wp-content/themes/ronneby/redux_framework/ReduxCore/inc/class.redux_filesystem.php on line 29
CCM | Mechanical engineering
logo_costruzionimeccaniche
A dynamic

evolution

The CCM Finotello has been active for over 40 years in cableways installations and construction.

The CCM Finotello realizes four-seat and two-seat chairlifts, ski lifts and cable cars equipped with the most advanced techniques and solutions made to the highest standards of quality and safety.

In 2016, the CCM has acquired the CMI leader in the mechanical construction based in Bricherasio in an area of 35,000 m2 of which 9,500 m2 are covered by the industrial building used as a workshop, offices and technical rooms. The strengths are in the construction of steel structures and mechanical constructions of large dimensions.

The company is able to carry out assemblies consisting of electronic, hydraulic and pneumatic.


Sectors
Our equipment
The headquarters of Bricherasio occupies an area of 35,000 m2 of which 9,500 m2 are covered by the industrial building used as a workshop, offices and technical rooms.
The industrial building is conceived and structured with modern methods and is interlocked with n. 2 bridge cranes from 5 t, n. 1 6 t, n. 7 10 t, n. 2 15 t and n. 1 50 t (maximum height under crane 12.5 m).
CUTTING DEPARTMENT

1 Pantograph oxyfuel and plasma PC controlled for computer aided management for cutting sheet metal. the machine capacity: 3000 x 12000 (Inox sp.90 mm; Fe sp.300 mm);

1 Center of Water-Jet cutting FLOW Waterjet type Dyna MIC. the machine’s cutting capacity: 3050 x 6050. Cutting accuracy of alloys, steel, stone, VE- tro, Composites (with exclusion of ferrous materials);

1 Centro Laser cutting TRUMPF 3060 4000W with automatic pallet change. Capacity of the machine: 2000 x 6000 mm (Inox 12 mm Fe 20 mm)

Automatic warehouse with 70 Po- stations for the storage, management and feeding of the sheets for laser cutting and the Water-jet for sizes up to 6000 x 2000 mm.

1 laser cutting center Mazak Fabri Gear 300 3D cutting, drilling and thread- ing of pipes, molded case, and structural profiles. the labor camp until Diam. 320mm, sp. 20 mm, with the length of the bars up to 12 m.

1 hacksaw PEDRAZZOLI control. Capacity: 350×350

1 hacksaw AMADA CNC. Capacity: 400 x 400;

2 Seghetti, 250×250 Capacity;

1 Saw AMADA Capacity: 650 x 650 cuts 90 ° – 60 °

1 Shear Capacity L = 3000 Sp.10;

CARPENTRY DEPARTMENT

6 of Tyres Stations;

TruLaser Robot 5020 system with generator and transmission diode laser beam with optical fiber model vimentate from Kuka robots for welding and 3D laser cutting, working range 7000×1950 h.1500

robotic welding MIG MAG-TIG with Panasonic robots, positioners and 2 lathe, work camp Dia. 2500, L = 9100.

4 welding stations with positioner;

8 welders spunbond controlled pulsed arc;

2 Plants submerged arc 800-600 A. Lincoln;

4 lifts HITACHI TIG 400 A

1 AMADA bending 400 t NC, L = 4000 mm;

1 AMADA CNC bending 80 t, L = 1200 mm;

DEPARTMENT MECHANICS

TURNING:

1 of 7-axis CNC turning center DOOSAN PUMA3100 ULY. Capacity: Ø 420 x 3125;

1 Lathe IMTS TX-200 Numerical Control. Capacity: Ø 400 x 1000;

1 Mazak Lathe Numerical Control MATRIX. Capacity: Ø 380 x 1000;

1 of multi-axis CNC turning center Mori Seiki NL2500. Capacity: Ø 80 x 795;

1 Parallel Lathe Numerical Control HEELS. Capacity: Ø 510×4500;

1 Parallel lathe displayed on 3 axes. Capacity: Ø 600 x 2200;

1 Parallel lathe displayed on 3 axes. Capacity: Ø 650 x 2000;

1 Parallel lathe displayed on 3 axes, capacity: Ø 800 x 5000;

1 Parallel lathe displayed on 3 axes. Capacity: Ø 1100 x 10000;

1 Lathe CNC Vertical, capacity: Ø 1600 x H = 1000;

1 Lathe CNC Vertical, capacity: Ø 4200 x H = 2000;

1 Vertical Lathe Pensotti displayed, capacity Ø 2400 x H = 2000;

BORING:

1 Boring STAM with moving column CNC SELCA S4045, capacity: X = 12000, Y = 3000

1 Boring moving column (ŠKODA) with 5-axis CNC. Capacity: X = 4000, Y = 2500, Z = 1600. Table rototraslante 2000×2000, load 20 t;

1 Boring moving column (ŠKODA) with 5-axis CNC Selca S4045. Capacity: X = 6500, Y = 4000, Z = 2000, Table rototraslante 4000×3600, load 60 t;

1 mobile upright boring machine (TOS) with 5-axis CNC. Capacity: X = 3500, Y = 2000, Z = 800, W = 1250 Table rototraslante 1800×1800, load 12 t

1 Boring fixed column (TC) with 5-axis CNC. Capacity: X = 2000, Y = 1600, Z = 1600, Table rototraslante 1500 x 1500, 8 t load.

MILLS:

1 Milling Center Mod. BM3200 to C.N. CNC SELCA 3045 profits Corse: H = 3000 x 1500 x 1000, 30 Max tool change positions, loaded 11,000 kg, RAM output;

1 Milling Center Butler Newall Elgamill 15000 moving column CNC SELCA S4045. Tool magazine with 40 posi- tions. Measuring lengths: X = 15000 Y = 1000 Z = 2800, RAM Output, Swiveling Table vole.

1 of Nicolas Correa CNC Milling Center, Corse: H = 6000 x 2000 x 1200, RAM output;

1 MAUT CNC machining center, with indexing head 4 Pos. Measuring lengths: 6000 x H = 2000 x 1000 RAM output;

1 Milling Center C.N. Capacity: 800 x 500 x H = 750;

1 Milling Center C.N. Capacity: 800 x 600 x H = 450;

1 planer-cutter STEBINI with JKS

5 milling heads controlled 3-axis. Capacity: 15000 x 1600 H = 1100;

1 Planer CINCINNATI, with CNC Selca S3045 2 controlled axes. Capacity: 6400 x 1000 x 1000.

ADJUSTMENTS:

1 Grinding FAVRETTO bypass. Capacity: 2000 x 600.

SLOTTING:

1 Slotting capacity: Ø 1400 H = 800, stroke 700;

BALANCING:

1 balancer balancer dynamic VILLAGE. Capacity: Ø 2600 x 12000 with printer.

TRAPANI:

1 Radial drilling, capacity: Ø 80 – Stroke 2500;

1 Radial drilling, capacity: Ø 100 – stroke 2500;

1 Radial drilling, capacity: Ø 80 – Stroke 2200;

2 Radial drilling, capacity: Ø 60 – Stroke 1000;

ASSEMBLY DEPARTMENT

1 area of 1200 m2 equipped with reference planes for mounting machine sections: H = 6 m below bridge cranes of 15 t;

1 of 300 m2 equipped with reference platforms Area for installation of machines sections H = 12.5 m below the bridge crane 50 t

Quality laboratory

The quality laboratory is equipped with all the necessary tools for the control of production processes, components, products and materials purchased. In addition, the laboratory manager must monitor compliance with the instructions contained in the quality management manual (check list of production control, checklists, procedures, instructions).

Scheda di esempio

Excellence in quality and safety

UNI EN ISO 9001:2000: Management system for quality in design, construction and refurbishing of suspended mobility systems.

EN 1090: Certification by the Italian Institute for Welding, additional CE marking.

EN729 / ISO3834 Part 2: Certification by the Italian Institute for Welding part of manufacturing of Structural Metal and Equipment for suspended mobility and construction of mechanical carpentry. All welders are provided with patents.

DM 14/01/2008: Certificate of denunciation of the processing center No2204 / 12